Home
F-14 Tomcat Micro RC Plane 460mm
- Details
- Written by: Julius Perdana
- Category: RC Foam Project
Actually I'm planning to build a new RC Aircraft Carrier, but this one I will build an older one which is USS Nimitz. Like the previous model the first thing I do is to make a small RC plane to launch on top of the deck of the aircraft Carrier. I choose a rather vintage timeline which is 80s era, so I made an F-14 Tomcat. At first I use medium density styrofoam as the main material but also tried using a low density styrofoam. This time I use 3 channel control rather than 2 channel like usually I made a micro RC plane so I hope it will be more precise in control so I can practice landing on the carrier.
F-14 Tomcat 1860mm EDF RC Plane
- Details
- Written by: Julius Perdana
- Category: RC Foam Project
At last finally I build the F-14 Tomcat. I waited for it for so long, waiting to have enough experience on building an EDF jet fighter. As usual this jet model was built by my friend Roy by following my plans, and then sent to me like an empty canvas so I can paint it with VF-84 Jolly Rogers color scheme. This F-14 can move its variable sweep wing, but can it fly with wing swept back? Just watch it till the end on the build and fly video on my Youtube channel.
Cartoon Cessna 182 RC Plane
- Details
- Written by: Julius Perdana
- Category: RC Foam Project
This cartoon style RC model plane is based on Cessna 182. I just squeeze it into a chubby plane. This model is quite unique, because this is the second model from the models that I ever made, that needs counter weight ballast on the tail. The first one is T-6A Texan II model. The ballast is quite heavy, around 200 gram, so recommend to put the battery on the tail so you don't have to add ballast and will save about 200 gram of weight. With 1200 gram the plane is quite fast but with 1000 gram I believe it will more enjoyable. But after all the plane is easy to control, just add aileron rudder mixing about 40% for smooth turning.
F-15EX Eagle II RC Plane with Ducted Fan
- Details
- Written by: Julius Perdana
- Category: RC Foam Project
This is the first time I use twin EDF for fighter jet model. This F-15EX Eagle II RC model use twin 70mm EDF for the power plant.
I share all the plans and decal files on my website paper-replika.com, you can find the link to the build instructions page below. This model is simplified but still resemble the scale look of the F-15EX Eagle II on the top side, but the bottom side is very simple so the build process will not too hard. The model was build by my friend Roy with plans from me. The hardest part when building this model is on the nose section. The air intake comes in 2 different angles, so you may choose which one to make. Also the canopy has 2 version too, you can use segmented canopy or 2 piece of mica plastic molding.