In support of Anakin and Obi-Wan in the Battle of Coruscant, the two Jedi are escorted by a squadron of ARC-170 fighters (aggressive reconnaissance fighters). Absolutely loyal to the Republic, the clone pilots have the mission of diverting the Trade Federations fighters and clearing the way for the Jedi. With the inbred obedience that they received in the Kaminoan breeding station, these brave fighters voluntarily sacrifice themselves, so that the Jedi can fulfill their mission. However, the clone pilots also have access to the skills of the bounty hunter Jango Fett and place themselves in the path of the enemy undaunted by death. The reconnaissance fighter has a class 1.5 hyperdrive and carries torpedoes and laser cannons. It is therefore less manoeuvrable than the Jedi Starfighter and the fate of the ARC-170 is decided solely by the know-how of the three-man crew..[revell]
Main Body Parts number : 1,2,3
- Part number two are separated into 3 parts 2A,B & C
- Don't forget to cutout 4 holes on part number 1, the ones with asterisk symbols
- Beak like nose is part number 3
Main Body Parts number : 1,2,3,4
- Assembly part number 4 in the bottom of the tail
Main Body Parts number : 8,9,10,11,12
- Part number 8 separated in 2 parts, 8A & 8B. 8B is the one on the bottom
- Don't forget to cutout a hole on part number 12
- Place the cockpit part (8A, 8B) on the fuselage
- Add the cockpit part with canopy frames (9,10,12)
- Add a layer (part number 11) in the fuselage
Main Body Parts number : 5A, 5B
- Add a layer (5A & 5B) on the bottom of the tail
Main Body Parts number : 7 & 8
- glue part number 8 and 7 on the bottom of the main body
Main Body Parts number : 55, 40-46
- Cannon parts are 40-46, one set on top and another on the bottom of the tail
- Part number 55 is an astrodroid, be careful when cutout because it’s tiny, they have no flaps
Main Body
- The holes are for joins socket for the engine
Engine : Parts number : 13-22
- There are 2 engines, so #13A is left and #14A is for right, or vice versa
- Add the cone blade (22) on the blade (18)
- Roll Part number 16 with the printed side inside
- Glue #19 & #20/21 first before add to the inside of the air intake
- Make a hole at number 17
Engine : Parts number : 13-38
- Parts number 13,23,24 are each consisted with 2 parts
- Parts number 27-29 are rings for part number 25
- There are 8 parts of number 28. The same parts to assembled with number 27 & 29
Engine and Main Body Joins : Parts number : 64 & 65
- Insert parts number 64 & 65 both left and right in the holes of the main body until they close each other and glue them
Engine and Main Body Joins : Parts number : 64 & 65
- Assembly both engines with the main body
Main Wings : Parts number : 47-50
- Assembly both wings on the two engines, place them at the center vertically to the engine
Additional Wings : Parts number : 51-54
- Assembly 4 additional wings with the both engines
Main Cannons Parts number : 56-61
- Assembly the main cannons
Display Stand Parts number : 62 & 63
- Assembly the display stand. You must figure out to place it on the center of the model gravity to insure it will sustain the model.
- Enjoy building! If you found errors or have difficulties don’t hesitate to contact me
Document license
You may freely distribute or give away these paper models to others without prior permission from the designer, you may modify with the credit to paper-replika.com. Feel free to add any of these paper models to your website or blog, with the link to paper-replika.com model pages. Do not use direct link. Uploading to mass file storage for public view is forbidden, including, but not limited to, rapidshare, mediafire and others which provide similar service. All images are copyrighted. Permission is granted ONLY for non-commercial personal use. They may not be duplicated in any form, including electronic, mechanical or printed, for sale. All rights are reserved and duplication by any means,including, but not limited to, methods of printing, electronic storage and disk copies, is prohibited without permission. If you wish to use this artwork and instructions for other than your own personal use, like for a club contest or school program,PLEASE contact paper-replika.com for written permission.
This work is licensed under a
Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License.
No Warranty is provided whatsoever. This material is provided on an as-is basis with no support and no warranty. All real life objects belong to its respective owners and designers.
This pattern never been tested, some minor errors were found in several of previuos models, please be advise maybe you will find errors such as missing tabs or unnecessary tabs, despite the models never been tested, many have succeeded build all of them perfectly, just need little imagination and dedication to this hobby.
To download this file you DO NOT NEED to be registered as a member, Registration whatsoever needed to join paper-replika.com FORUM and to give comments on articles. Paper-replika.com NEVER share your identity or sale to third party, and it will be kept safe.
We use third-party advertising companies to serve ads when you visit our website. These companies may use information (not including your name, address, email address, or telephone number) about your visits to this and other websites in order to provide advertisements about goods and services of interest to you. If you would like more information about this practice and to know your choices about not having this information used by these companies, click here.
PASSWORD : paper-replika.com (case sensitive)
Open PDF file with Adobe Acrobat Reader, PDO with Pepakura Viewer.
The assembly instruction is not include with the file that you are about to download. You can find the assembly instructions of this model with just go back and browse previous page.
Agree and download