This is part 2 for building ATR-72 600 RC plane. In this episode I will cover about building the tail section, stabilizer and wing mounting. By looking at this second video, I hope I can finish it in part 3 and maiden flight in part 4, which also including all previous parts combined together in just single tutorial. The main things I share on this episode is how to bend and roll depron foam and how to glue and assembly the parts.
Specs :
1. Wingspan 180 cm / 70.9 inches
2. Flying weight : -
3. Wing loading : -
4. Wing cube loading : -
5. Wing Area 38.7 dm2 - 600 sq.in
Electronics
- 2X Turnigy 2826 1400kv motor
- 2X ESC 40A
- 2X Battery Lipo 3S 2200mah / Li-ion 3S 3300 mah
- 4 metal gear 9 gram servos
- 3 plastic gear 9 gram servos
- Propeller : 7x4x3
Materials :
1. 5mm Depron/ Polyfoam
2. 3mm Plywood
BUILD INSTRUCTIONS :
BUILD INSTRUCTIONS TO BE CONTINUED TO PAGE 2
Open the PDF file with Adobe Acrobat Reader (recommended software)
PDF security password : paper-replika.com
Download ATR-72 600 plans part 2
Video Tutorial on Youtube