Before maiden flight, we need to finish the aircraft with few steps, like making a battery hatch door, maintenance hatch door, marking the CG position, attaching control horns and pushrods. Maiden flight was scheduled on last Saturday but failed because one of the ESC is different and causing different speed from each motor. It finally flew well on Monday and Tuesday after both ESC were replaced.
Specs :
1. Wingspan 180 cm / 70.9 inches
2. Flying weight : 1800 gram / 63.5 oz
3. Wing loading : 46.5 g.dm2 / 15.2 oz/sq.ft
4. Wing cube loading : 7.5
5. Wing Area 38.7 dm2 - 600 sq.in
Electronics
- 2X Turnigy 2826 1400kv motor
- 2X ESC 40A
- 1X / 2X Battery Lipo 3S 2200mah / Li-ion 3S 3300 mah
- 4 metal gear 9 gram servos
- 3 plastic gear 9 gram servos
- Propeller : 7x4x3
Materials :
1. 5mm Depron/ Polyfoam
2. 3mm Plywood
BUILD INSTRUCTIONS
Open the PDF file with Adobe Acrobat Reader (recommended software)
PDF security password : none
ATR-72 600 RC Plane Part 4 Complete
