This template specially made for AR Drone 2.0 pilots who want to customized their drone hull. It is when my hobbies merged together, piloting AR Drone 2.0 and paper modeling. It’s started when Parrot gave me a unit of the new version 2 drone as a gift for my involvement in their promotion campaign, which is a paper model contest in this site in July 2012. Since that time I decided to do this hobby and now I have two drones. I made a 1:3 AR Drone 2.0 with both outdoor and indoor hull model for that contest. That one third model is not accurate so I made a new one with 1:1 scale by measuring the original hull, so it will fit into the real drone. I made the template last night, print it today and build it just now. I took some picture of it while it still on the ground and while flying as well.  I took pictures while the drone in auto-hover mode on quite strong breeze, but I had to do that before it’s getting dark (5 PM). Please understand this hull can not function like the original hull. It can not  protect the battery and specially the front mounted camera on impact or in a crash, it's light weight but it is not strong enough. Make sure to tighten the hull to the drone base because it can loose by the strong wind, you can use magnet sheet but I use double adhesive tape. Once again use it by understanding your own risk, I can not guaranty it will work to everybody. I also add blank patterns on the the last pages.

{youtube}6Aa_sJk8y2M{/youtube}

ASSEMBLY INSTRUCTIONS :

1. Make sure score well all parts and pre fold each parts before assembly.
2. I use 260 gsm art paper printed with digital printing printer.
3. Use UHU glue or PVA glue
4. You have to do these steps below in order, unless you will have difficulty
5. Attach part 5 to part 3
6. Complete part 4 with 7 and 8
7. Combine 3 and 5 with part 4,7 and 8
8. Then attach part 2 on them from below
9. Combine part 6 with 1 first and add magnet sheets or double adhesive tape on its place
10. Complete the hull by combine all parts together, top and bottom.

{youtube}-qNhR3ZkV6s{/youtube}


Document license

You may freely distribute or give away these paper models to others without prior permission from the designer, you may modify with the credit to paper-replika.com. Feel free to add any of these paper models to your website or blog, with the link to paper-replika.com model pages. Do not use direct link. Uploading to mass file storage for public view is forbidden, including, but not limited to, rapidshare, mediafire and others which provide similar service. All images are copyrighted. Permission is granted ONLY for non-commercial personal use. They may not be duplicated in any form, including electronic, mechanical or printed, for sale. All rights are reserved and duplication by any means,including, but not limited to, methods of printing, electronic storage and disk copies, is prohibited without permission. If you wish to use this artwork and instructions for other than your own personal use, like for a club contest or school program,PLEASE contact paper-replika.com for written permission.

Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License.

Creative Commons License

No Warranty is provided whatsoever. This material is provided on an as-is basis with no support and no warranty. All real life objects belong to its respective owners and designers.

This pattern never been tested, some minor errors were found in several of previuos models, please be advise maybe you will find errors such as missing tabs or unnecessary tabs, despite the models never been tested, many have succeeded build all of them perfectly, just need little imagination and dedication to this hobby.

To download this file you DO NOT NEED to be registered as a member, Registration whatsoever needed to join paper-replika.com FORUM and to give comments on articles. Paper-replika.com NEVER share your identity or sale to third party, and it will be kept safe.

We use third-party advertising companies to serve ads when you visit our website. These companies may use information (not including your name, address, email address, or telephone number) about your visits to this and other websites in order to provide advertisements about goods and services of interest to you. If you would like more information about this practice and to know your choices about not having this information used by these companies, click here.

PASSWORD : paper-replika.com (case sensitive)

Open PDF file with Adobe Acrobat Reader, PDO with Pepakura Viewer.

The assembly instruction is not include with the file that you are about to download. You can find the assembly instructions of this model with just go back and browse previous page.

 

Agree and download 

Custom AR Drone 2.0 Outdoor hull : NASA Theme template