You are here:: Home

    M40A3 Sniper Rifle Paper Model

    E-mail Print

    The M40 is a bolt-action sniper rifle used by the United States Marine Corps. It has had three variants — the M40, the M40A1 and the M40A3. The M40 was introduced in 1966. The changeover to the A1 model was completed in the 1970s, and the A3 in the 2000s. Each firearm begins life as a Remington 700, and is then extensively modified by hand by USMC 2112/gunsmiths at Marine Corps Base Quantico, using components from a number of suppliers. New M40A3s are being built, and A1s are upgraded to A3s as they rotate into the armory for service and repair. The rifles have had many sub-variations in telescopic sights, and smaller user modifications.

    The original M40 was a military type-classified version of the Remington 700; it was factory-made, and had a one-piece wooden stock. The M40A1 and A3 switched to fiberglass, with new scopes added as well. The trigger pull on both models (M40A1/A3) is 3 to 5 lbs. [wikipedia]

    Designer Notes : I like to play Call of Duty 4 Multiplayer game, this rifle is one of my favorite rifle, it most accurate compare to others. For you who play Counterstrike might also familiar to this sharpshooter's rifle. It is called AWP Magnum on that game. The model comes with 2 scales, 1/6 & 1/3. Thw 1/6 scale is tiny, I will build it myself to prove it to you, it can be built and looks wonderful at 1/6 scale. The 1/6 scale also comes with display pedestal and 1/3 one dont have it. Maybe you are wondering why I make 1/6 scale and it is so tiny? It is a secret!! LOL, just stay tuned you will know why...

    M40A3 sniper Rifle

    Heavy Barrel : Parts 1-3
    - Consist of 3 parts, number 2 is the one with the hole-like image
    - Roll the barrel with the help of small cylinder wooden stick or any small cylinder object

    M40A3 sniper Rifle

    Heavy Barrel : Parts 1-5
    - Assembly parts 3,4 & 5 in the end of the barrel

    M40A3 sniper Rifle

    Fiberglass stock
    - Assembly part 6 and attach it with the barrel set
    - Make sure the ejection cartridge cover is faced just like the picture above

    M40A3 sniper Rifle

    M40A3 sniper Rifle

    Fiberglass stock
    - Assembly the grip - part 9 and follow by parts 10 & 11

    M40A3 sniper Rifle

    Adjustable Stock
    - Assembly parts number 12 & 00 to complete the rifle
    - Attach number 13 to part 12

    M40A3 sniper Rifle

    Trigger & Trigger Guarder
    - Assembly trigger parts number 14-16

    M40A3 sniper Rifle

    Scope
    - Assembly the scope 18-36
    - The scope receiver is consisted with 2 parts , number 19 is to cover unprinted side in the back of part 18

    M40A3 sniper Rifle

    M40A3 sniper Rifle

    Scope
    - Assembly the scope 18-36
    - Part number 31 is to cover unprinted side of number 30

    M40A3 sniper Rifle

    Bolt action handle
    - Assembly the bolt action handle (I don’t know what it’s called) number 17 to the barrel

    M40A3 sniper Rifle

    M40A3 sniper Rifle

    Sling Holder
    - Assembly rear and front Sling holder number 37 just like the pictures above
    - Bipod position just like in the picture above

    M40A3 sniper Rifle

    Bibod
    - Assembly bipod parts number 38-42

    M40A3 sniper Rifle

    Display Stand
    - Assembly display stand parts number 43-44

    {youtube}yiyJgvUtEzk{/youtube}

    You must agree on Document License agreement page first, choose agree on the radio button then you will proceed
    Download

    Open the PDF file with Adobe Acrobat (recommended software)
    PDF security password : paper-replika.com

    {ads2}

    M40A3 Sniper Rifle Paper Model Template

    Ezoicreport this ad