Category: Weapon

This model is a request from Paper Replika new Facebook group, Paper Replika Friends. On that group you can discuss about every model made by Paper Replika and also you can make suggestion or request of model that you like and want to be made as paper model pattern. Every request will still filter by me, and only approved requests will be made. This RPG-7 paper model template contains 30 pages of patterns. The scale is 1:1, so I also made its inner construction. The warhead can be detach but with simplified model. I recommend to use 200 gsm paper and thicker for its inner constructions. This Soviet portable  unguided rocket missile is very popular heavy weapon among armed forces in many countries. Some countries copied its design or reproduce under license.

WARNING : It is made of paper and will not actually shoot, just for display purposes. Please be advised, it may built with paper but it surely look like a REAL weapon, please do not use it other than display purposes, such as carry it around on public places. You could have problems with authorities. You can disassemble it when transporting. On some countries possessing this kind of model is illegal, please be sure before making the model.

 

Assembly construction stick for the projectile warhead (77 and 79) using part 78 inside them. You can add additional rolls of paper inside it to add strength if you want to. Attach the stick with back part of the warhead (29,27 and 30)

Complete the warhead by adding part 2,3 and 22 on the front segment and part 6 and fins (part 4)

Assembly the middle part of the launcher (45,46,48,53 and 49) using part 81 inside part 45 and 46. All part's seams are at the bottom except for part 53, its seam is on top. You have to be careful not to make mistake on those seam alignments.

Assembly the wooden heat cover part (1,5 and 8) and then insert part 75 on the inside. Push part 75 until it touches the inner side of part 8, add glue to make them stick together. Align both seams on top and bottom.

Complete the wooden heat protection cover with part 7 and 15.

Assembly the constructions stick part (82,85,86 and 80) with part 78 inside them. You can add more roll of paper or thicker paper inside it to add strength.

Combine front and middle part of the launcher with previously assembled construction stick. Watch the red line on part 86.

Assembly the rocket exhaust cone part (50,55,56,5,61,62 and 65). Valley fold on part 62

Combine the exhaust cone with the rest of the launcher base.

Add details according to the image above.


Place part 35 on the exposed part 43/42 to cover the white paper sides.

Glue the trigger to a sheet of paper (part 10) that were glued first inside part 72, that way the trigger can swing back when you pull it with part 10 as a hinge.

Align the seam correctly at the bottom on part 83

 


Document license

You may freely distribute or give away these paper models to others without prior permission from the designer, you may modify with the credit to paper-replika.com. Feel free to add any of these paper models to your website or blog, with the link to paper-replika.com model pages. Do not use direct link. Uploading to mass file storage for public view is forbidden, including, but not limited to, rapidshare, mediafire and others which provide similar service. All images are copyrighted. Permission is granted ONLY for non-commercial personal use. They may not be duplicated in any form, including electronic, mechanical or printed, for sale. All rights are reserved and duplication by any means,including, but not limited to, methods of printing, electronic storage and disk copies, is prohibited without permission. If you wish to use this artwork and instructions for other than your own personal use, like for a club contest or school program,PLEASE contact paper-replika.com for written permission.

 
This work is licensed under a

Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License.

Creative Commons License

No Warranty is provided whatsoever. This material is provided on an as-is basis with no support and no warranty. All real life objects belong to its respective owners and designers.

This pattern never been tested, some minor errors were found in several of previuos models, please be advise maybe you will find errors such as missing tabs or unnecessary tabs, despite the models never been tested, many have succeeded build all of them perfectly, just need little imagination and dedication to this hobby.

To download this file you DO NOT NEED to be registered as a member, Registration whatsoever needed to join paper-replika.com FORUM and to give comments on articles. Paper-replika.com NEVER share your identity or sale to third party, and it will be kept safe.

We use third-party advertising companies to serve ads when you visit our website. These companies may use information (not including your name, address, email address, or telephone number) about your visits to this and other websites in order to provide advertisements about goods and services of interest to you. If you would like more information about this practice and to know your choices about not having this information used by these companies, click here.

PASSWORD : paper-replika.com (case sensitive)

Open PDF file with Adobe Acrobat Reader, PDO with Pepakura Viewer.

The assembly instruction is not include with the file that you are about to download. You can find the assembly instructions of this model with just go back and browse previous page.

Agree and download 

Life Size RPG-7 Launcher Paper Model colored template