Continuing the series of Boeing triple seven models, this time I made a Boeing 777-200 template from Malaysian government-owned airline, Malaysia Airlines. This model is also a tribute to the victims of the plane that is still the mysterious its whereabouts. Not as I suppose, after often read the news about the MH370 flight, none of the Mh370 number printed on the airframe. Not much news agency were stating the aircraft registration number, 9M-MRO, but often informed simply by the flight number, MH370. B777-200 was the initial version before the 300 series that I have the previously release.

200 series fuselage is more than 10 meters shorter and without the swept wing tip as the 300 series. 200 series is 63.7 meters and series 300 is 73.9 cm. I cut the 300 fuselage, before the wing and after the wing. This model also with different engines, it used Rolls Royce engine. While in the previous release 300 series use General Electric engine.

Recently, the most bizarre incident happened in the aviation world . Malaysia Airlines Boeing 777-200 plane disappeared on a flight from Kuala Lumpur to Beijing . It's been almost a month has not been any signs of debris from the flight of MH370 . The Boeing 777 is a great aircraft , some of the visitors of Paper replika request for a model replica . Ok, I think I will make but with different color first , as a base . Somewhat different from the MH370 flight using a Boeing 777-200 , PK - GIA from Garuda Boeing is using 777 - 300ER. Newer type and longer .

As in the previous airliners models models , this model using the technique with inner glue tabs , but with a little adjustment for easier on assembling . The improvements are removal of the inner glue tabs on the bottom of each part , replaced by moving the flap directly on parts. Inner glue tab is only used to connect between the parts to other parts . Wing attachment has also been strengthened by the use of reinforcing ribs so hopefully the main wing will no longer bent downward. The template consist of 8 pages of patterns.

We have a new papercraft of the upcoming movie, Captain America The Winter Soldier that will be released tomorrow, April 4th 2014 in United States. This model template was submitted and designed by Suraj S. Prakash. This midnight (GMT +7) he sent the files to be published in Paper Replika, so here it is. Wikipedia says the actor who roled as Steve Rogers is still Chris Evans, and we will still see the beauty Scarlett Johansson as Black Widow as well. The story centered on the new threat from a Soviet Agent called the Winter Soldier.

Can't wait to see it, but we will have to wait until 26th April for international release. Ok, back to the template. The template is in 7 pages PDF file, and with pdo file as an assembly instructions only. The scale is 1:6, the complete model will have 30 cm or 12 inches height.

This Tony Start papercraft / paper figure template was submitted by Saurabh Jethani. He wanted his work to be hosted in paper-replika.com. The reason was, he thought Tony's papercraft should be in the same site as other Iron Man papercrafts. So Iron Man fan can download it and build it for free. He shared the template in 2 PDO files, one with lines and the other is without lines. You can open this template using Pepakura Viewer, as you may know PDO file can be a pattern and an assembly instructions at once, so there are no graphic image instructions as usual. This is part is only a beginning, the leg will be added soon after he finished preparing the rest of the part.