Part 2 consists of patterns to make the hands of Iron Man Gemini. The pattern only consists of 4 pieces. The patterns are identical for left and right hand, just in the opposite direction. In this post I also wanted to show a photo of paper models of iron man that were build by the Uzan from Ponjong - Indonesia. In the lower left corner are the result of an assembled Iron Man Gemini . Uzan has changed the color pattern to plain pattern to create that model. Uzan using fancy papers, Stardream brand.
MSN - 06S Sinanju -The White Comet Paper Model
This is the first time I saw the recolor version of a paper model template resulting a very much better than the original one. Yes It was a red Sinanju (Gundam) template, and then recolored and retouched by Suprayogi from Yogyakarta - Indonesia. You can download the templates at below, I already upload them part by part. You can use the original assembly instructions that also found on this website. Model on the picture was build by Haris Rakhman Hidayat from Malang - Indonesia. Haris made it using BC paper / plain paper 150 gram, PVA glue and a bit of CA glue and finished it with clear lacquer coat. Surprisingly Haris printed and build it by not following the original paper size, he printed on A6 size, half size of the original one (A4).
Honda Civic Type-R R3 Paper Model
I just bought a second handed RC car, a Tamiya TT01. It came with a broken Mazda RX7 body. It gave me an idea to make a body from paper model that will fit on that 257 mm wheelbase chassis, so there are no interior parts in it. Then a friend of mine gave me suggestions for a cool rally car, finally I fixed my decision to make this Honda Civic Type R R3 paper model because it looks very cool, and because the rims are the same as the rims on my RC model car. Although this paper model was specifically designed for TT01 body, it also can be assembled as a stand alone paper model because I also provide patterns for wheels. The complete model will has 41 cm length and 13 cm height. The livery of this Honda Civic was designed by JAS Motorsport, an Italian racing team. I add a watermark on every images on this post, because I received many reports about some of Paper Replika's model were sold in eBay, which is supposed to be free for download.
Airbus A330-343X Cebu Pacific Paper Model
First I would like to condole our friends who become victims of Typhoon Haiyan in the Philippines. It is very sad to see the number of victims and almost half were children. Hope for the best for them and the family. This model was submitted by our friend Miguel Quilab from Philippines. He changed the pattern of Paper Replika's Airbus A330-200 to become A330-343X by adding fuselage length a bit longer than the original. Miguel uses Philippines Cebu Pacific Air livery, its color is beautiful. He also made landing gears patterns and provide a template in 1:100 scale.
Extended Parts for Honda Civic RR3 RC Car Body.
I added a page of pattern of frames or formers for Honda Civic RR3 paper model. It is for you who build this model to become a body for a 257 mm wheel-based RC car as I did. The frames are needed for keeping the model in shape, because large models tend to deform. For you who build this as a stand alone paper model, you don't need these parts. You can download the file on this post and I already replace the original file as there are also revision on few parts that had unnecessary glue tabs. As you see on the picture below, I use 1.5 mm thick cardboard for the formers. The model itself assembled using 260 gsm (gram per square meter) art-paper, printed with digital printing printer in a print-shop.
Page 5 of 175