Paper Replika

 
 
You are here:: Instructions RC Projects
 
 

RC Projects

ATR-72 600 RC Plane Part 3

E-mail Print

In this last part of building ATR-72 600, I'm going to share with you how to make wing and motor mounting, also aileron and flaps. In this ATR we're going to make flap hinge from 3mm plywood. This plane use twin turnigy 1400kv motor with 7x4 3 blade prop. The livery of this plane is Citilink

Read more

How to Make ATR-72 600 RC Plane Part 2

E-mail Print

This is part 2 for building ATR-72 600 RC plane. In this episode I will cover about building the tail section, stabilizer and wing mounting. By looking at this second video, I hope I can finish it in part 3 and maiden flight in part 4, which also including all previous parts combined together in just single tutorial. The main things I share on this episode is how to bend and roll depron foam and how to glue and assembly the parts.

 

Read more

Bango 1 RC plane for Beginners

E-mail Print

I have many request for releasing a simple RC plane plans for beginners, so I decided to designed one. This plane is designed specifically for beginners that still learn how to fly an RC plane and to familirized the orientation. Beginner tends to broke front propeller so I put the prop on the back. Beginners tend to have slow reflex after taking off so I made the wing with big amount of dihedral angle, about 8 degree. So the plane will autolevel by itself. Taking off is also pretty easy just push the throttle it will take off by itself without touching elevator or rudder sticks. It also easy to build only uses 2 servos (3 channels) and very robust construction if it built right. It crashed on maiden but it can stand the test and survived.

 

Read more

Page 2 of 6