Paper Replika

 
 
You are here:: Instructions Aircraft DHC-2 Beaver N92AK
 
 

DHC-2 Beaver N92AK

E-mail Print
Article Index
DHC-2 Beaver N92AK
Page 2
Page 3
Page 4
Page 5
All Pages

We have a new livery for our DHC-2 Beaver. Recolored by Jonathan Norman, he said he used to fly with his friend who flew N92AK Beaver. When his friend asked him where to find a wooden scale model of a DHC Beaver, he had something else in his mind.     This paper model is in 1/32 scale. Big enough to have a decent details. The model wing will have about 45 cm wingspan. You need to use 3 type of paper or card, for the main template 160-200 gram card will be good and for the struts and spinner you will need 80-100 gram paper and the last is 1 mm thick cardboard. I also made a new numerical system, the formers will have F letter on the front and G for glue-tabs and each elements have the same number, in example if part 4 has glue-tab it will be G4 and if it has former, it will be F4. I made a slide show video on youtube about this build, you can watch it here. Please Subscribe my channel of you like :).

ASSEMBLY INSTRUCTIONS :

Glue the gluetab (G1) to the back of part 1 and then attach formers (F1A and F1B). Glue G2 onto windshield (2) before attaching it onto part 1.

Glue G4 onto back of part 4. Glue part 4 with set of part 1 first, then attach a former (F4A) on part 4.

Close the front of part 1 with part 3 (cylinder engines texture). Glue part 5 with the previous part set and then glue a former (F5). Assembly "joint helper" with part 48 and 2 formers (F48A and F48B). Glue "joint helper" in the middle of F5.

Assembly tail section like the image above. Pierce 2 circles on part 7 and insert a toothpick.

Glue part G9 onto the back of part 9. Assembly the cowl part 9,10 and 11 then glue the air intake (12). You can choose to build an easier cowl with part 9 and 10*.

ASSEMBLY INSTRUCTIONS CONTINUE TO PAGE 2

You must agree on Document License agreement page first, choose agree on the radio button then you will proceed
Download

Open the PDF file with Adobe Acrobat Reader (recommended software)
PDF security password : paper-replika.com



DHC-2 Beaver N92AK template