|DHC-2 Beaver 1/32 Papermodel|
Glue part G23 to part 23. Assembly middle section of the float (23) with 2 formers (F23A & F23B).
Assembly rear section of the float (22) with former (F22)
Assembly the rest of the float like the image above. Repeat the process on the other float.
Attach water rudder as shown above.
ASSEMBLY INSTRUCTIONS CONTINUE TO PAGE 4
You must agree on Document License agreement page first, choose agree on the radio button then you will proceed
Open the PDF file with Adobe Acrobat Reader (recommended software)
PDF security password : paper-replika.com