Paper Replika

 
 
You are here:: Instructions Aircraft Piper PA-47 PiperJet Papermodel
 
 

Piper PA-47 PiperJet Papermodel

E-mail Print
Article Index
Piper PA-47 PiperJet Papermodel
Page 2
All Pages

Usually I build the RC plane first and then later I release the papermodel version of it, but often I became lazy and it never happened. So this time I made the paper version first. This model is a single engine very small corporate jet from Piper Aircraft Inc, a PiperJet. I found this plane very beautiful and I want to make an RC plane of it. I love their Cherokee, I already made an RC of it and it flew so good very easy to handle. Sadly this Piper PA-47 PiperJet never went into production, the project ended after they made a prototype and first flew on 2008. They even redesigned the PiperJet and then came PiperJet Altaire, but once again they cancel it due to economic conditions on 2011. I made this papermodel in 1/33 scale, the model will have 40 cm or 16 inches wingspan.

 

 

Roll part no.7 into tube shaped fuselage  and then put 2 formers part L inside it, with a little bit on both  the edges. The former purpose is to maintain the form of the fuselage. Make sure the dotted guide line is align with the fuselage seam. Use cardboard for the formers and 160 gram paper for the fuselage (skin).

This papermodel uses inserted glue tabs, which are represented with letters on the last page of the template. You need to glue the gluetabs on the inside side of the compliment part. For example : 2+A, it means you need to glue part A on the inside edge of part 2, before you can glue it with part 1. You can use 160 gram paper for the skin part and 80-100 gram paper for the insert glue tabs.

Part 22-23 function as the reinforce structure for the plane's belly so the wing will have a rigid platform to glue on to. Use cardboard 1 mm thickness for the formers/ structures. It is important to make this set rigid and strong.

Assembly the plane's belly first before wrap it around on the bottom of the fuselage. It is important to glue inside part 11 and the rest if belly part that contacted with onto the cardboard structures, and make it rigid.

Make sure to assembly part 18 and 19 inside part 16 before continuing to assembly the rest. The same as how to assembly the fuselage part, do the same on the jet engine parts. Put cardboard part M inside part 38 and wrap it around, this is the horizontal stabilizer part. Insert the horizontal stabilizer in the slit on the tail section of the fuselage and glue it.

You must agree on Document License agreement page first, choose agree on the radio button then you will proceed
Download

Open the PDF file with Adobe Acrobat Reader (recommended software)
PDF security password : paper-replika.com



Piper PA-47 PiperJet Papermodel template



More articles :

» Piaggio P-180 Italian Coast Guard Paper Model

This model is the result of recoloring aircraft model that is already on paper replika, a Piaggio...

» A380 Lufthansa 1:144 Paper Model

As I mentioned earlier about converting the existing of A380 paper model series from 1:300 scale...

» Asphalt Devil Angkot 61 Paper Model

Angkot 61 Paper Model. This transport vehicle is really a pain in  the @#s for many of Jakarta's...

» M-O Paper Model

M-O (Microbe Obliterator) is a cleaner-bot programmed to clean anything that comes aboard the Axiom...

» Merry-Go-Round Airplane Toy : Kawanishi N1K2-J Shiden Paper Craft

It is still warm, just released by cerebrave (Arif Suseno) from hobikitkertas.com. He created a...

» X-51A Waverider Papermodel

The Boeing X-51A Waverider is an experimental aircraft cooperative effort of the United States Air...

» Built Photos of Scout Trooper 1/12

As usual Taufik always been a super fast builder. This morning he tagged me "again" on his facebook...

» Built Unicorn Gundam

Unicorn Gundam paper model built by friend on mine from Malaysia, Terry Koh. He let me publish his...

» F/A-18F Super Hornet Diamondbacks Paper Model

F/A-18F Diamondbacks is actually a Super Hornet but Kim apply its color scheme to Paper Replika...

» F-15E Tiger Meet 2005 Papercraft

As I mentioned before in my last post this is F-15E Tiger Meet 2005 templates from Kim (Knife and...