Paper Replika

 
 
You are here:: Home
 
 

Piper PA-47 PiperJet Papermodel

E-mail Print
Article Index
Piper PA-47 PiperJet Papermodel
Page 2
All Pages

Usually I build the RC plane first and then later I release the papermodel version of it, but often I became lazy and it never happened. So this time I made the paper version first. This model is a single engine very small corporate jet from Piper Aircraft Inc, a PiperJet. I found this plane very beautiful and I want to make an RC plane of it. I love their Cherokee, I already made an RC of it and it flew so good very easy to handle. Sadly this Piper PA-47 PiperJet never went into production, the project ended after they made a prototype and first flew on 2008. They even redesigned the PiperJet and then came PiperJet Altaire, but once again they cancel it due to economic conditions on 2011. I made this papermodel in 1/33 scale, the model will have 40 cm or 16 inches wingspan.

 

 

Roll part no.7 into tube shaped fuselage  and then put 2 formers part L inside it, with a little bit on both  the edges. The former purpose is to maintain the form of the fuselage. Make sure the dotted guide line is align with the fuselage seam. Use cardboard for the formers and 160 gram paper for the fuselage (skin).

This papermodel uses inserted glue tabs, which are represented with letters on the last page of the template. You need to glue the gluetabs on the inside side of the compliment part. For example : 2+A, it means you need to glue part A on the inside edge of part 2, before you can glue it with part 1. You can use 160 gram paper for the skin part and 80-100 gram paper for the insert glue tabs.

Part 22-23 function as the reinforce structure for the plane's belly so the wing will have a rigid platform to glue on to. Use cardboard 1 mm thickness for the formers/ structures. It is important to make this set rigid and strong.

Assembly the plane's belly first before wrap it around on the bottom of the fuselage. It is important to glue inside part 11 and the rest if belly part that contacted with onto the cardboard structures, and make it rigid.

Make sure to assembly part 18 and 19 inside part 16 before continuing to assembly the rest. The same as how to assembly the fuselage part, do the same on the jet engine parts. Put cardboard part M inside part 38 and wrap it around, this is the horizontal stabilizer part. Insert the horizontal stabilizer in the slit on the tail section of the fuselage and glue it.

You must agree on Document License agreement page first, choose agree on the radio button then you will proceed
Download

Open the PDF file with Adobe Acrobat Reader (recommended software)
PDF security password : paper-replika.com



Piper PA-47 PiperJet Papermodel template


 

Put reinforce part 26 and former part 25 on to the back side of part 26 (bottom side wing), and then cover and close it with part 27. Assembly the other side of the wing as well.

Once both wings are ready, glue it on the side of the plane's belly. The wing should be a slightly dihedral, so just like I said before it's important to make the belly part rigid so the wing will have the strong and rigid platform to cling to. Complete both wing with winglets (part 37). Attach the vertical stabilizer or fin, part number 20 and 21.

Now the landing gears. you need to poke and make a hole on the bottom nose part and insert the small paper tube as the front landing gear strut all the way above until it touch the upper inside part of the nose. You need to put a glue on the one side of the tube before doing that. Do the same for the both wings. The model is finish.

You must agree on Document License agreement page first, choose agree on the radio button then you will proceed
Download

Open the PDF file with Adobe Acrobat Reader (recommended software)
PDF security password : paper-replika.com



Piper PA-47 PiperJet Papermodel template

More articles :

» Kyrios Gundam Paper Model - Arms and Shoulder Parts

We have two updates on Kyrios Gundam parts. Wanda has released the shoulder and arms parts. We...

» Boeing 777-300ER Garuda Paper Model

Recently, the most bizarre incident happened in the aviation world . Malaysia Airlines Boeing...

» F/A-18C Dambusters Hornet Paper Model

Again this is Kim's latest work, this time he re-colored Paper Replika F-18 Blue Angels Hornet...

» Error Parts on A380 Patterns

There are several errors on A380 parts, the first is texture on middle fuselage was not properly...

» Spaceshiptwo Papercraft Build in Stop Motion Video

This stop motion video is created by Alexandre Dufeil from France, he finish this Paper Replika...

» Patch for A380 Lufthansa Airlines Paper Model

I recall received few emails regarding a mistake on A380 Lufthansa templates. There is a missing...

» F-15E Idolmaster Chihaya Kisaragi Papercraft

This release is the last work from Kim (South Korea) on recoloring Paper Replika's original F-15...

» F-86 Sabre USAF Papercraft

Design by Timmy Arditio (Indonesia). The North American Aviation F-86 Sabre (sometimes called the...

» MQ-9 Reaper 1/32

The latest United States Air Force Strike Unmanned Aerial Vehicle (UAV). It is a development and...

» Air France Airbus A380 Paper Model

It's time for airliner paper plane again, this time I start with Airbus A380 with Air France...