Paper Replika

 
 
You are here:: Home
 
 

Piper PA-47 PiperJet Papermodel - Page 2

E-mail Print
Article Index
Piper PA-47 PiperJet Papermodel
Page 2
All Pages

 

Put reinforce part 26 and former part 25 on to the back side of part 26 (bottom side wing), and then cover and close it with part 27. Assembly the other side of the wing as well.

Once both wings are ready, glue it on the side of the plane's belly. The wing should be a slightly dihedral, so just like I said before it's important to make the belly part rigid so the wing will have the strong and rigid platform to cling to. Complete both wing with winglets (part 37). Attach the vertical stabilizer or fin, part number 20 and 21.

Now the landing gears. you need to poke and make a hole on the bottom nose part and insert the small paper tube as the front landing gear strut all the way above until it touch the upper inside part of the nose. You need to put a glue on the one side of the tube before doing that. Do the same for the both wings. The model is finish.

You must agree on Document License agreement page first, choose agree on the radio button then you will proceed
Download

Open the PDF file with Adobe Acrobat Reader (recommended software)
PDF security password : paper-replika.com



Piper PA-47 PiperJet Papermodel template



More articles :

» Piaggio P180 M Avanti Papermodel

Sounds like a scooter manufacturer, but it is an high tech aircraft from Piaggio Aero. This is a...

» Interstellar Ranger Spacecraft Paper Model

Actually this scale model was not in my plans. I stumbled upon its picture when I browse for Philae...

» Patch for M8 Avenger Paper Model

When I was preparing for M8's blank templates I found a bug on part 48. I should have edit it when...

» Zobel Light Reconnaissance Vehicle Paper Model

I have been preparing for this model since long, but only in the form of 3d models. Because of the...

» United Nations Peacekeeper VAB (Armored Vehicle)

VAB is a French made APC (Armored Personnel Carrier), developed and designed by GIAT Industries....

» Unicorn Gundam Papercraft - Hyper Bazooka

This is the last part of complete Unicorn Gundam paper model by Paper Replika. It supposed to be...

» Ancient Quimbaya Airplane

This artifact is some kind of jewelry made from gold. It was found on Colombia, it was dated around...

» AS-202 Bravo - Trainer Aircraft Papercraft

This papercraft was designed and build by Dani Hamdani. The FFA AS 202 Bravo was a single-engine...

» Built M2A2 Bradley

Paper Replika M2A2 Bradley built by David Lukens and Adhiwardhana Widjajanto. Both have their own...

» Ratchet - Transformers 3 Papercraft

Paul once more share with us his recolor Ratchet in truck mode. He made the truck skin too match...