Paper Replika

You are here:: Home

Boeing 777-200 British Airways Paper Model

E-mail Print

Another Boeing 777 airliner model papercraft template, this time I made British Airways triple seven (B777-23/ER). This Waterside based airline has 43 of B777-200ER airplanes. There is something new in its logo, a crown logo added beside British Airways logo. The template is exactly the same as previous B777-200 model, only different is on the livery. The assembly instructions is the same as well. For you who is not familiar with model with inner glue tabs perhaps find this model hard, but if you try it according to the instructions I'm sure you will find this method is easier than ordinary pepakura style glue tabs.


Assembly nose and front fuselage section by using inner glue tabs (45,46,47,48,49) inside the parts. You can use 100-120 gsm paper for all parts except for ribs and formers.

Assembly wing base, using formers (3 x 73) to form the shape. Use cardboard 0,5 - 1 mm thick cardboard for the formers.

Combine center fuselage section with wing base ans glue them secured. Make sure they are centered.

Assembly the rest of the fuselage, the rear section (15,13,20) glue them together by using inner glue tabs (49,50)

Attach vertical and horizontal stabilizers. Make sure the vertical fin is straight and centered. Glue the horizontal stabilizers a bit angled up.

Assembly the left wing ribs like the image above. Use part 66 and 65 to fix the angle.

Wrap around the left wing ribs with wing skins part (39 an 38). Use inner glue tab no. 54 for glueing both wing skin together.

Do the same for the right wing as already done with the left one.

Assembly the left engine part like the image above. Wrap around part 56 using part 24 with printed side on the inside. Assembly the engine shape using inner glue tabs part 53. Wrap around part 57 with part 27. Wrap around part 58 with part 28. Pay attention to the engine pylon, they are different for left and right engine.

Do the same to the right engine as the left one.

Roll part 9 and 12 from left to right on the patterns. Use 2 part of part 76 for the front tyre.

Roll part 42 and 40 from left to right on the patterns.

Dim lights Embed Embed this video on your site

You must agree on Document License agreement page first, choose agree on the radio button then you will proceed

Open the PDF file with Adobe Acrobat Reader (recommended software)
PDF security password :

Boeing 777-200 British Airways Paper Model template

Boeing 777-200 British Airways Paper Model
More articles :

» USS Enterprise - Aircraft Carrier Paper Model

I think this is the best model I've ever seen that was coming from Paperhobby so far. Rizky made...

» Merry-Go-Round Airplane Toy : Kawanishi N1K2-J Shiden Paper Craft

It is still warm, just released by cerebrave (Arif Suseno) from He created a...

» Tiny KLM Airbus A330 Paper Model Inside a Light Bulb

A reader who is a member of Polish Historical Model club (Klub Modelarsko Historyczny Sokół)...

» F4U Corsair Aircraft Paper Model

This F4U Corsair paper model template is one of my design that was derived from my foam RC plane...

» F-15E Tiger Meet 2005 Papercraft

As I mentioned before in my last post this is F-15E Tiger Meet 2005 templates from Kim (Knife and...

» X-51A Waverider Papermodel

The Boeing X-51A Waverider is an experimental aircraft cooperative effort of the United States Air...

» NU 200 Beetle - "Si Kumbang" Experimental Aircraft

NU-200 Si Kumbang or "The Beetle" in English is an experimental aircraft produced and first flown...

» PZL-104 35A Wilga Aircraft Paper Model

I am an aircraft lover since I was a kid, Wilga caught my eye when I visit Satria Mandala Museum....

» Black Box or Flight Data Recorder Paper Model

The flight data recorder (FDR) (also ADR, for Accident Data Recorder) is a device used to record...

» Air Asia Airbus A320-200 Paper Model

This model is for remembering a tragic aircraft accident that happened on Air Asia flight 8501 on...