Paper Replika

 
 
You are here:: Home
 
 

Boeing 777-200 British Airways Paper Model

E-mail Print

Another Boeing 777 airliner model papercraft template, this time I made British Airways triple seven (B777-23/ER). This Waterside based airline has 43 of B777-200ER airplanes. There is something new in its logo, a crown logo added beside British Airways logo. The template is exactly the same as previous B777-200 model, only different is on the livery. The assembly instructions is the same as well. For you who is not familiar with model with inner glue tabs perhaps find this model hard, but if you try it according to the instructions I'm sure you will find this method is easier than ordinary pepakura style glue tabs.

ASSEMBLY INSTRUCTIONS :

Assembly nose and front fuselage section by using inner glue tabs (45,46,47,48,49) inside the parts. You can use 100-120 gsm paper for all parts except for ribs and formers.

Assembly wing base, using formers (3 x 73) to form the shape. Use cardboard 0,5 - 1 mm thick cardboard for the formers.

Combine center fuselage section with wing base ans glue them secured. Make sure they are centered.

Assembly the rest of the fuselage, the rear section (15,13,20) glue them together by using inner glue tabs (49,50)

Attach vertical and horizontal stabilizers. Make sure the vertical fin is straight and centered. Glue the horizontal stabilizers a bit angled up.

Assembly the left wing ribs like the image above. Use part 66 and 65 to fix the angle.

Wrap around the left wing ribs with wing skins part (39 an 38). Use inner glue tab no. 54 for glueing both wing skin together.

Do the same for the right wing as already done with the left one.

Assembly the left engine part like the image above. Wrap around part 56 using part 24 with printed side on the inside. Assembly the engine shape using inner glue tabs part 53. Wrap around part 57 with part 27. Wrap around part 58 with part 28. Pay attention to the engine pylon, they are different for left and right engine.

Do the same to the right engine as the left one.

Roll part 9 and 12 from left to right on the patterns. Use 2 part of part 76 for the front tyre.

Roll part 42 and 40 from left to right on the patterns.

Dim lights Embed Embed this video on your site

You must agree on Document License agreement page first, choose agree on the radio button then you will proceed
Download

Open the PDF file with Adobe Acrobat Reader (recommended software)
PDF security password : paper-replika.com



Boeing 777-200 British Airways Paper Model template

More articles :

» AS-202 Bravo - Trainer Aircraft Papercraft

This papercraft was designed and build by Dani Hamdani. The FFA AS 202 Bravo was a single-engine...

» Merry-Go-Round Airplane Toy : Kawanishi N1K2-J Shiden Paper Craft

It is still warm, just released by cerebrave (Arif Suseno) from hobikitkertas.com. He created a...

» Monarch Airlines A330-243 Papercraft

Monarch Airlines is a British charter and scheduled airline based in Luton, England. It is one of...

» Cessna 172 Skyhawk Floatplane Papercraft

I don't remember exactly the last time I design an aircraft beside the airliner series. Aircraft...

» RQ-7 Shadow UAV Paper Model

Do you remember Kim, he is from South Korea who frequently recolor Paper Replika F-18 Hornet and...

» F/A-18 Red Devil Hornet Paper Model

Actually I have received this model pattern since two weeks ago, but I just got time to edit it and...

» Airbus A330-234 Garuda Indonesia Papercraft

A new category has been added, it is Airliners Series. This category will host airliners paper...

» F-15SE Silent Eagle Papercraft

F-15SE Silent Eagle paper craft model kit templates recolored by Kim (South Korea). When I received...

» F/A-18F Super Hornet Diamondbacks Paper Model

F/A-18F Diamondbacks is actually a Super Hornet but Kim apply its color scheme to Paper Replika...

» F/A-18F Black Lions Super Hornet Paper Model

Again, this is the latest work sent to me by our friend Kim from South Korea. This time he made a...