Paper Replika

 
 
You are here:: Home
 
 

Boeing 777-300ER Garuda Paper Model

E-mail Print

Recently, the most bizarre incident happened in the aviation world . Malaysia Airlines Boeing 777-200 plane disappeared on a flight from Kuala Lumpur to Beijing . It's been almost a month has not been any signs of debris from the flight of MH370 . The Boeing 777 is a great aircraft , some of the visitors of Paper replika request for a model replica . Ok, I think I will make but with different color first , as a base . Somewhat different from the MH370 flight using a Boeing 777-200 , PK - GIA from Garuda Boeing is using 777 - 300ER. Newer type and longer .

As in the previous airliners models models , this model using the technique with inner glue tabs , but with a little adjustment for easier on assembling . The improvements are removal of the inner glue tabs on the bottom of each part , replaced by moving the flap directly on parts. Inner glue tab is only used to connect between the parts to other parts . Wing attachment has also been strengthened by the use of reinforcing ribs so hopefully the main wing will no longerĀ  bent downward. The template consist of 8 pages of patterns.

ASSEMBLY INSTRUCTIONS :

Assembly nose and front fuselage section by using inner glue tabsĀ  (45,46,47,48,49) inside the parts. You can use 100-120 gsm paper for all parts except for ribs and formers.

Assembly wing base, using formers (3 x 73) to form the shape. Use cardboard 0,5 - 1 mm thick cardboard for the formers.

Combine center fuselage section with wing base ans glue them secured. Make sure they are centered.

Assembly the rest of the fuselage, the rear section (15,13,20) glue them together by using inner glue tabs (49,50)

Attach vertical and horizontal stabilizers. Make sure the vertical fin is straight and centered. Glue the horizontal stabilizers a bit angled up.

Assembly the left wing ribs like the image above. Use part 66 and 65 to fix the angle.

Wrap around the left wing ribs with wing skins part (39 an 38). Use inner glue tab no. 54 for glueing both wing skin together.

Do the same for the right wing as already done with the left one.

Assembly the left engine part like the image above. Wrap around part 56 using part 24 with printed side on the inside. Assembly the engine shape using inner glue tabs part 53. Wrap around part 57 with part 27. Wrap around part 58 with part 28. Pay attention to the engine pylon, they are different for left and right engine.

Do the same to the right engine as the left one.

Roll part 9 and 12 from left to right on the patterns. Use 2 part of part 76 for the front tyre.

Roll part 42 and 40 from left to right on the patterns.

{youtube}2kecF6DQJ2g{/youtube}

You must agree on Document License agreement page first, choose agree on the radio button then you will proceed
Download

Open the PDF file with Adobe Acrobat Reader (recommended software)
PDF security password : paper-replika.com



Boeing 777-300ER Garuda Paper Model template

Boeing 777-300ER Garuda Paper Model
More articles :

» Tomahawk Missile Papermodel

New paper model kits designed by Rizky Ferriansyah. The BGM-109 Tomahawk is a long-range,...

» Monarch Airlines A330-243 Papercraft

Monarch Airlines is a British charter and scheduled airline based in Luton, England. It is one of...

» Ferocious Frankie P-51D Mustang - Aircraft Paper Model

This is the second times I ever designed a paper model template using cardboard as former, the...

» F/A-18C Dambusters Hornet Paper Model

Again this is Kim's latest work, this time he re-colored Paper Replika F-18 Blue Angels Hornet...

» Douglas 1186-C Aircraft Paper Model

This model is very rare, Rizky made a Douglas Model 118-C paper model template. Sounds unfamiliar...

» Merry-Go-Round Airplane Toy : Kawanishi N1K2-J Shiden Paper Craft

It is still warm, just released by cerebrave (Arif Suseno) from hobikitkertas.com. He created a...

» Lika : Gubee Flyer

This papercraft is the second of Lika series. She has her own ultralight now, that she called Gubee...

» Junkers Ju EF112 Papercraft

This aircraft papercraft templates is designed by Rizky Ferriansyah. He made it in 1: 35 scale. The...

» NU 200 Beetle - "Si Kumbang" Experimental Aircraft

NU-200 Si Kumbang or "The Beetle" in English is an experimental aircraft produced and first flown...

» F-15K in Pre-Painted Color Scheme Papercraft

Kim done it again, still with the original templates of Paper Replika F-15 model kit, he recolored...