Paper Replika

 
 
You are here:: Home
 
 

Honda Civic Type-R R3 Paper Model

E-mail Print

I just bought a second handed RC car, a Tamiya TT01. It came with a broken Mazda RX7 body. It gave me an idea to make a body from paper model that will fit on that 257 mm wheelbase chassis, so there are no interior parts in it. Then a friend of mine gave me suggestions for a cool rally car, finally I fixed my decision to make this Honda Civic Type R R3 paper model because it looks very cool, and because the rims are the same as the rims on my RC model car. Although this paper model was specifically designed for TT01 body, it also can be assembled as a stand alone paper model because I also provide patterns for wheels.

The complete model will has 41 cm length and 13 cm height. The livery of this Honda Civic was designed by JAS Motorsport, an Italian racing team. I add a watermark on every images on this post, because I received many reports about some of Paper Replika's model were sold in eBay, which is supposed to be free for download.

On both headlights (5 & 6)  you can choose whether to use paper parts or transparent plastic sheet. If you use this on your TT01 chassis you may want to use transparent plastic sheet for the headlights so you can add LEDs later. Also there are two patterns for the front window (19) , one from paper and the other for transparent plastic sheet.

Part 18 and 17 are to be combined in a valley fold form.

Attach part 16 to 7 first before attaching part 34. Put the side window glass (24), both paper or plastic sheet and then put on part 29.

Attach part 15 to 8 first before attaching part 35. Assembly instruction continue on the next page.

Door handle base (part 23) is a valley fold form.

Part 23 also in valley fold form.

Part 51 is to be combined with part 50. Part 51 is a valley fold form. Part 50 is correspondent with part 51 and 49

Use 1.5 mm thick cardboard for parts above. This set up is used for a stand alone paper model. If you build this for an RC car body see picture below.

Use also 1.5 mm thick cardboard for those formers. This set up is used for an RC body model.

Dim lights Embed Embed this video on your site

You must agree on Document License agreement page first, choose agree on the radio button then you will proceed
Download

Open the PDF file with Adobe Acrobat Reader (recommended software)
PDF security password : paper-replika.com



Honda Civic Type-R R3 Paper Model template

Honda Civic Type-R R3 Paper Model
More articles :

» EVE Paper Model

EVE Paper Model. EVE (Extra-terrestrial Vegetation Evaluator) is a sleek, state-of-the-art...

» Optimus Prime Part 2B Papercraft

Part 2B is ready to assembled with part 2A, so finally you can attach the Optimus Prime head on his...

» Iron Man Mark 38 Igor Paper Model Part 1

This template was submitted by Cristiano Luis Diaz, he also who made the 3D model and unfolded it....

» Douglas 1186-C Aircraft Paper Model

This model is very rare, Rizky made a Douglas Model 118-C paper model template. Sounds unfamiliar...

» AC-130U Spooky Gunship Paper Model

This AC-130U Spooky Gunship aircraft paper model is actually requested by many paper model builders...

» WALL-E Paper Model

WALL-E Paper Model. WALL -E (Waste Allocation Load Lifter Earth Class) is programmed to clean up...

» Spongebob - Anime Crossover Papercraft

Nice idea to combine two different papercraft into crossover papercrafts. Rido Prasetyo Nugroho...

» Revision on L-100 Hercules

There is an error on part 8, I have replaced the file or you can download or a single part (part...

» Merkava Mark II Main Battle Tank

Merkava / Merkabah / Chariot Mark II was first introduced into general service in April 1983 and...

» Ben-10 Papertoy - Four Arms (Tetramand)

Ben-10 papertoy from Jodi Maulana. This papercraft is still  based on templates. Four Arms is a...