Paper Replika

 
 
You are here:: Home
 
 

Honda Civic Type-R R3 Paper Model

E-mail Print

I just bought a second handed RC car, a Tamiya TT01. It came with a broken Mazda RX7 body. It gave me an idea to make a body from paper model that will fit on that 257 mm wheelbase chassis, so there are no interior parts in it. Then a friend of mine gave me suggestions for a cool rally car, finally I fixed my decision to make this Honda Civic Type R R3 paper model because it looks very cool, and because the rims are the same as the rims on my RC model car. Although this paper model was specifically designed for TT01 body, it also can be assembled as a stand alone paper model because I also provide patterns for wheels.

The complete model will has 41 cm length and 13 cm height. The livery of this Honda Civic was designed by JAS Motorsport, an Italian racing team. I add a watermark on every images on this post, because I received many reports about some of Paper Replika's model were sold in eBay, which is supposed to be free for download.

On both headlights (5 & 6)  you can choose whether to use paper parts or transparent plastic sheet. If you use this on your TT01 chassis you may want to use transparent plastic sheet for the headlights so you can add LEDs later. Also there are two patterns for the front window (19) , one from paper and the other for transparent plastic sheet.

Part 18 and 17 are to be combined in a valley fold form.

Attach part 16 to 7 first before attaching part 34. Put the side window glass (24), both paper or plastic sheet and then put on part 29.

Attach part 15 to 8 first before attaching part 35. Assembly instruction continue on the next page.

Door handle base (part 23) is a valley fold form.

Part 23 also in valley fold form.

Part 51 is to be combined with part 50. Part 51 is a valley fold form. Part 50 is correspondent with part 51 and 49

Use 1.5 mm thick cardboard for parts above. This set up is used for a stand alone paper model. If you build this for an RC car body see picture below.

Use also 1.5 mm thick cardboard for those formers. This set up is used for an RC body model.

Dim lights Embed Embed this video on your site

You must agree on Document License agreement page first, choose agree on the radio button then you will proceed
Download

Open the PDF file with Adobe Acrobat Reader (recommended software)
PDF security password : paper-replika.com



Honda Civic Type-R R3 Paper Model template

More articles :

» WALL-E Fire Extinguisher Paper Model

Two type fire extinguisher that appear in the movie, one from the trash dump scene (Earth), and the...

» Ferocious Frankie P-51D Mustang - Aircraft Paper Model

This is the second times I ever designed a paper model template using cardboard as former, the...

» Pocoyo Paper Figure

Still doing commercial project, this is an unofficial pocoyo papercraft. A request from my friend....

» Tomahawk Missile Papermodel

New paper model kits designed by Rizky Ferriansyah. The BGM-109 Tomahawk is a long-range,...

» Piper PA-47 PiperJet Papermodel

Usually I build the RC plane first and then later I release the papermodel version of it, but often...

» Iron Man Mark 38 Igor Paper Model Part 1

This template was submitted by Cristiano Luis Diaz, he also who made the 3D model and unfolded it....

» Build Your Own Paper Robots

Build Your Own Paper Robots contains 14 amazing robot models to colour, print and build, with...

» Mercedes Benz Smart Cabrio Paper Model

This model as I may say is the first detailed paper model of a car that I ever made. I was inspired...

» New Paper Models on Model Directory

New paper models have been added to Paper Replika model directory. Christmas themed : Greeny X-mas...

» Beechcraft T-34C Mentor Paper Model (Aircraft)

Latest release from Rizky (Paperhobby), a trainer aircraft Beechcraft T-34C Mentor. He made this...