Paper Replika

 
 
You are here:: Home
 
 

MSN - 06S Sinanju -The White Comet Paper Model

E-mail Print

This is the first time I saw the recolor version of a paper model template resulting a very much better than the original one. Yes It was a red Sinanju (Gundam) template, and then recolored and retouched by Suprayogi from Yogyakarta - Indonesia. You can download the templates at below, I already upload them part by part. You can use the original assembly instructions that also found on this website. Model on the picture was build by Haris Rakhman Hidayat from Malang. Haris made it using BC paper / plain paper 150 gram, PVA glue and a bit of CA glue and finished it with clear lacquer coat. Surprisingly Haris printed and build it by not following the original paper size, he printed on A6 size, half size of the original one (A4).

You must agree on Document License agreement page first, choose agree on the radio button then you will proceed
Download

Open the PDF file with Adobe Acrobat Reader (recommended software)
PDF security password : paper-replika.com

Part 1 : head template - Part 2 : torso template - Part 3 : waist template - Part 4 : Leg template - Part 5 : arm template - Part 6 : booster template - Part 7 : shield template

MSN - 06S Sinanju -The White Comet Paper Model
More articles :

» Robotech Legioss AFC-01 Papercraft

This is a papercraft of a jet fighter form of Genesis Climber Mospeada Robotech: Legioss AFC-01H...

» Shoulder part for Unicorn Gundam

Two pages of pattern for this unicorn gundam's shoulder. My plan was to release complete arm parts,...

» Unicorn Gundam Paper Model (Torso)

Continuing Unicorn Gundam head on previous post, here is the second part, which is its torso. I...

» Gundam Nadleeh - Akwos Papercraft (GN Drive Capsule)

When I still preparing for Sinanju's leg papercraft Wanda has already release Nadleeh's torso...

» Oblivion Drone Paper Model

I know this is not a very new movie (2013), but it was playing again on HBO recently so it caught...

» NZ-666 Kshatriya

Kshatriya paper model designed by "Ghost of Prime", he wants to share with us his papercraft design...

» Sword Impulse Gundam Paper Model - Part 4 (Arm)

This template contains of 6 pages of patterns for both Sword Impulse Gundam arms. The page begins...

» VN-GO Painter Robot 2X Papercraft

I received many request for VN-GO 2X scale and to continue other WALL-E robots as well, this is...

» Gundam Nadleeh - Akwos Papercraft (Torso)

Update parts for continue building Nadleeh Akwos Gundam Papercraft. As usual Wanda make separate...

» Kyrios Gundam Papercraft - Legs (Final)

The final releases from Wanda Bachtiansyah. He made Kyrios Legs and the Flight Stabilizer. With...