Paper Replika

 
 
You are here:: Home
 
 

MSN - 06S Sinanju -The White Comet Paper Model

E-mail Print

This is the first time I saw the recolor version of a paper model template resulting a very much better than the original one. Yes It was a red Sinanju (Gundam) template, and then recolored and retouched by Suprayogi from Yogyakarta - Indonesia. You can download the templates at below, I already upload them part by part. You can use the original assembly instructions that also found on this website. Model on the picture was build by Haris Rakhman Hidayat from Malang. Haris made it using BC paper / plain paper 150 gram, PVA glue and a bit of CA glue and finished it with clear lacquer coat. Surprisingly Haris printed and build it by not following the original paper size, he printed on A6 size, half size of the original one (A4).

You must agree on Document License agreement page first, choose agree on the radio button then you will proceed
Download

Open the PDF file with Adobe Acrobat Reader (recommended software)
PDF security password : paper-replika.com

Part 1 : head template - Part 2 : torso template - Part 3 : waist template - Part 4 : Leg template - Part 5 : arm template - Part 6 : booster template - Part 7 : shield template

MSN - 06S Sinanju -The White Comet Paper Model
More articles :

» Jaeger Striker Eureka Paper Craft Part 3 (Final)

Finally the final part is released, this part is for Striker Eureka hips and both legs. This part...

» Sinanju Gundam - Axe Paper Model

Another addition for big Sinanju Gundam, it is an axe. Based on Sinanju's axe SD version template...

» Real Human Piloted Robot - Kuratas Paper Model

New model from Paper Jurnal, this is a paper model of KURATAS. Kuratas is a real human operated...

» Waist Part for Gundam Unicorn

The waist part for unicorn gundam destroy mode papermodel. I had to re-design some parts a few...

» Gundam GAT-X105 Strike Papercraft - Head Part

This week Paper Replika made a poll about what the next Gundam paper model kit after Sinanju's...

» Shoulder part for Unicorn Gundam

Two pages of pattern for this unicorn gundam's shoulder. My plan was to release complete arm parts,...

» Sinanju Gundam Papercraft - Wing Booster Part

This release is the last part of the sinanju gundam papercraft model kit. The next part is the...

» Gundam Nadleeh - Akwos Papercraft Final (Leg)

At last the final part which is leg parts of Gundam Nadleeh / Akwos papercraft model kit that has...

» VN-GO Painter Robot Paper Model

Painting robots, one of which tracks paint wherever he goes.- Multicolor Fibrous Pigment...

» WIP : Optimus Prime - Final Modeling & Unfolding

 {ads3}Modeling Complete, continue to unfold into papercraft patterns then add textures. Hang on...