Paper Replika

 
 
You are here:: Home
 
 

Custom AR Drone 2.0 Outdoor hull : NASA Theme

E-mail Print

This template specially made for AR Drone 2.0 pilots who want to customized their drone hull. It is when my hobbies merged together, piloting AR Drone 2.0 and paper modeling. It’s started when Parrot gave me a unit of the new version 2 drone as a gift for my involvement in their promotion campaign, which is a paper model contest in this site in July 2012. Since that time I decided to do this hobby and now I have two drones. I made a 1:3 AR Drone 2.0 with both outdoor and indoor hull model for that contest. That one third model is not accurate so I made a new one with 1:1 scale by measuring the original hull, so it will fit into the real drone. I made the template last night, print it today and build it just now. I took some picture of it while it still on the ground and while flying as well.  I took pictures while the drone in auto-hover mode on quite strong breeze, but I had to do that before it’s getting dark (5 PM). Please understand this hull can not function like the original hull. It can not  protect the battery and specially the front mounted camera on impact or in a crash, it's light weight but it is not strong enough. Make sure to tighten the hull to the drone base because it can loose by the strong wind, you can use magnet sheet but I use double adhesive tape. Once again use it by understanding your own risk, I can not guaranty it will work to everybody. I also add blank patterns on the the last pages.

Dim lights Embed Embed this video on your site

ASSEMBLY INSTRUCTIONS :

1. Make sure score well all parts and pre fold each parts before assembly.
2. I use 260 gsm art paper printed with digital printing printer.
3. Use UHU glue or PVA glue
4. You have to do these steps below in order, unless you will have difficulty
5. Attach part 5 to part 3
6. Complete part 4 with 7 and 8
7. Combine 3 and 5 with part 4,7 and 8
8. Then attach part 2 on them from below
9. Combine part 6 with 1 first and add magnet sheets or double adhesive tape on its place
10. Complete the hull by combine all parts together, top and bottom.

 

Dim lights Embed Embed this video on your site

You must agree on Document License agreement page first, choose agree on the radio button then you will proceed
Download

Open the PDF file with Adobe Acrobat Reader (recommended software)
PDF security password : paper-replika.com


Custom AR Drone 2.0 Outdoor hull : NASA template

More articles :

» Spaceshiptwo Papercraft Build in Stop Motion Video

This stop motion video is created by Alexandre Dufeil from France, he finish this Paper Replika...

» Interstellar Ranger Spacecraft Paper Model

Actually this scale model was not in my plans. I stumbled upon its picture when I browse for Philae...

» T-64B Russian Main Battle Tank Papermodel

This model onced a commercial paper model from my first site julescrafter.com now I share it for...

» F/A-18F Super Hornet Diamondbacks Paper Model

F/A-18F Diamondbacks is actually a Super Hornet but Kim apply its color scheme to Paper Replika...

» CN-235 MPA - Maritime Patrol Aircraft Papercraft

New military aircraft paper model kit by Dani Hamdani. He made a CN-235 MPA, a military version of...

» Tiny KLM Airbus A330 Paper Model Inside a Light Bulb

A reader who is a member of Polish Historical Model club (Klub Modelarsko Historyczny Sokół)...

» PZL-104 35A Wilga Aircraft Paper Model

I am an aircraft lover since I was a kid, Wilga caught my eye when I visit Satria Mandala Museum....

» F-15E Tiger Meet 2005 Papercraft

As I mentioned before in my last post this is F-15E Tiger Meet 2005 templates from Kim (Knife and...

» Robocop - ED-209 Part 3 (Final) Paper Model

Finally part 3 (Final) of ED-209 robot from Robocop movie is ready for download. These leg parts...

» Air Asia Airbus A320-200 Paper Model

This model is for remembering a tragic aircraft accident that happened on Air Asia flight 8501 on...