Paper Replika

 
 
You are here:: Home
 
 

Custom AR Drone 2.0 Outdoor hull : NASA Theme

E-mail Print

This template specially made for AR Drone 2.0 pilots who want to customized their drone hull. It is when my hobbies merged together, piloting AR Drone 2.0 and paper modeling. It’s started when Parrot gave me a unit of the new version 2 drone as a gift for my involvement in their promotion campaign, which is a paper model contest in this site in July 2012. Since that time I decided to do this hobby and now I have two drones. I made a 1:3 AR Drone 2.0 with both outdoor and indoor hull model for that contest. That one third model is not accurate so I made a new one with 1:1 scale by measuring the original hull, so it will fit into the real drone. I made the template last night, print it today and build it just now. I took some picture of it while it still on the ground and while flying as well.  I took pictures while the drone in auto-hover mode on quite strong breeze, but I had to do that before it’s getting dark (5 PM). Please understand this hull can not function like the original hull. It can not  protect the battery and specially the front mounted camera on impact or in a crash, it's light weight but it is not strong enough. Make sure to tighten the hull to the drone base because it can loose by the strong wind, you can use magnet sheet but I use double adhesive tape. Once again use it by understanding your own risk, I can not guaranty it will work to everybody. I also add blank patterns on the the last pages.

Dim lights Embed Embed this video on your site

ASSEMBLY INSTRUCTIONS :

1. Make sure score well all parts and pre fold each parts before assembly.
2. I use 260 gsm art paper printed with digital printing printer.
3. Use UHU glue or PVA glue
4. You have to do these steps below in order, unless you will have difficulty
5. Attach part 5 to part 3
6. Complete part 4 with 7 and 8
7. Combine 3 and 5 with part 4,7 and 8
8. Then attach part 2 on them from below
9. Combine part 6 with 1 first and add magnet sheets or double adhesive tape on its place
10. Complete the hull by combine all parts together, top and bottom.

 

Dim lights Embed Embed this video on your site

You must agree on Document License agreement page first, choose agree on the radio button then you will proceed
Download

Open the PDF file with Adobe Acrobat Reader (recommended software)
PDF security password : paper-replika.com


Custom AR Drone 2.0 Outdoor hull : NASA template

Custom AR Drone 2.0 Outdoor hull : NASA Theme
More articles :

» L-100-30 Hercules TNI AU Papercraft

The Lockheed L-100 Hercules was the Lockheed Corporation's less successful civilian variant of the...

» Special Detachment 88 Papercraft - Black

A suspected terrorist linked to several Indonesian bombings in the past decade was killed in a...

» Spetsnaz GRU Paper Soldier

The Spetsnaz GRU is the best trained elite special force in Russian Federation Armed Force. The...

» Revision on L-100 Hercules

There is an error on part 8, I have replaced the file or you can download or a single part (part...

» BRL-A Paper Model

Mobile umbrella robots, one of which has trouble keeping himself closed. Automation and mobile...

» C-130H Hercules VIP - TNI AU Paper Model

This model was submitted by Dani Hamdani, he recolored Paper Replika C-130HC with US Coast Guard...

» Transjakarta Bus Paper Model

TransJakarta is a bus rapid transit system in Jakarta, Indonesia. TransJakarta started on January...

» OV-10F Bronco - Indonesian Air Force

Based on an air force monument Rizky designed and build this aircraft paper model. Indonesian Air...

» The AXIOM Spaceship WALL-E Paper Model

The AXIOM, mothership that appears on WALL E movie, habitated with a human colony that went from...

» Sandtrooper 1:6 Star Wars Paper Model

This is my first model in 2015. I usually break a figure paper model into several parts, but this...