Paper Replika

 
 
You are here:: Original Papercraft AR Drone 2 Custom Hull Custom AR Drone 2.0 Outdoor hull : NASA Theme
 
 

Custom AR Drone 2.0 Outdoor hull : NASA Theme

E-mail Print

This template specially made for AR Drone 2.0 pilots who want to customized their drone hull. It is when my hobbies merged together, piloting AR Drone 2.0 and paper modeling. It’s started when Parrot gave me a unit of the new version 2 drone as a gift for my involvement in their promotion campaign, which is a paper model contest in this site in July 2012. Since that time I decided to do this hobby and now I have two drones. I made a 1:3 AR Drone 2.0 with both outdoor and indoor hull model for that contest. That one third model is not accurate so I made a new one with 1:1 scale by measuring the original hull, so it will fit into the real drone. I made the template last night, print it today and build it just now. I took some picture of it while it still on the ground and while flying as well.  I took pictures while the drone in auto-hover mode on quite strong breeze, but I had to do that before it’s getting dark (5 PM). Please understand this hull can not function like the original hull. It can not  protect the battery and specially the front mounted camera on impact or in a crash, it's light weight but it is not strong enough. Make sure to tighten the hull to the drone base because it can loose by the strong wind, you can use magnet sheet but I use double adhesive tape. Once again use it by understanding your own risk, I can not guaranty it will work to everybody. I also add blank patterns on the the last pages.

{youtube}6Aa_sJk8y2M{/youtube}

ASSEMBLY INSTRUCTIONS :

1. Make sure score well all parts and pre fold each parts before assembly.
2. I use 260 gsm art paper printed with digital printing printer.
3. Use UHU glue or PVA glue
4. You have to do these steps below in order, unless you will have difficulty
5. Attach part 5 to part 3
6. Complete part 4 with 7 and 8
7. Combine 3 and 5 with part 4,7 and 8
8. Then attach part 2 on them from below
9. Combine part 6 with 1 first and add magnet sheets or double adhesive tape on its place
10. Complete the hull by combine all parts together, top and bottom.

 

{youtube}-qNhR3ZkV6s{/youtube}

You must agree on Document License agreement page first, choose agree on the radio button then you will proceed
Download

Open the PDF file with Adobe Acrobat Reader (recommended software)
PDF security password : paper-replika.com


Custom AR Drone 2.0 Outdoor hull : NASA template

Custom AR Drone 2.0 Outdoor hull : NASA Theme
More articles :

» Lika : Gubee Flyer

This papercraft is the second of Lika series. She has her own ultralight now, that she called Gubee...

» Toyota Avanza Papercraft

Papercraft design by Liem Kou Phing. The Toyota Avanza (also known as the Daihatsu Xenia in...

» Malaysian Ringgit Papercraft

The word ringgit means "jagged" in Malay and was originally used to refer to the serrated edges of...

» Nadask Projects : Life-size Warcraft Orc Paper Craft (Photos)

After a tiny A330 micro model inside a light bulb this one is just the opposite, Danillo Nadask...

» Monarch Airlines A330-243 Papercraft

Monarch Airlines is a British charter and scheduled airline based in Luton, England. It is one of...

» Airbus A320 Air New Zealand Paper Model

Air New Zealand were commissioned me for a paper model template design of one of their Airbus A320...

» Revision on L-100 Hercules

There is an error on part 8, I have replaced the file or you can download or a single part (part...

» USS Enterprise - Aircraft Carrier Paper Model

I think this is the best model I've ever seen that was coming from Paperhobby so far. Rizky made...

» Build Your Own Paper Robots

Build Your Own Paper Robots contains 14 amazing robot models to colour, print and build, with...

» F-86 Sabre USAF Papercraft

Design by Timmy Arditio (Indonesia). The North American Aviation F-86 Sabre (sometimes called the...