|Zobel Light Reconnaissance Vehicle Paper Model|
I have been preparing for this model since long, but only in the form of 3d models. Because of the limitations and the lack of reference blueprint images then makes this model less accurate. I only use a few photos to make this model. Based on the vehicle length obtained from the specification data, I made this model in 1 / 35 scale. The Zobel is produced by German military vehicle manufacturer GST (Gesellschaft fur Systemtechnik mbH) for light reconnaissance vehicles. Four-wheel suspension can be raised so that the vehicle body can be lifted upward to drive in off road terrain. The Zobel has not been actively used, it is still a prototype. File opening password : paper-replika.com
You can use black marker pen to color white surfaces on each sides of every parts, color those white surfaces before you glue each parts. I think the use of black marker is a must, unless you already happy with white stripes all over your model.
File opening password : paper-replika.com
The Zobel has 4 × 4 drive with steering on all four wheels. The vehicle is fully amphibious being propelled in the water by two propellers mounted at the front of the hull, one on either side. These propellers swivel to steer the vehicle when afloat. If required, the rear observer could also drive the vehicle for a short period. Standard equipment includes a complete range of communications equipment, an NBC system, a front-mounted winch for self-recovery operations and a central tyre pressure regulation system which allows the driver to adjust the tyre pressure when the vehicle is moving.
You must agree on Document License agreement page first, choose agree on the radio button then you will proceed
Open the PDF file with Adobe Acrobat (recommended software)
PDF security password : paper-replika.com
|< Prev||Next >|