Paper Replika

 
 
You are here:: Home
 
 

RC Projects

Walet FPV RC Plane

E-mail Print

I miss flying FPV but I don't have any plane for that. My last FPV plane, the Sky Arrow 1700 mm is crashed and beyond any repair. So I made this RC plane that I named it "Walet". Walet is an Indonesian name for "Swallow", a small and agile bird. Actually I planned to make the wingspan 1300 mm but I forgot to update the 3D model then it came out with 1400 plans. I think, what the heck, then I continue finishing the plans. Because it was surprisingly big, I released the smaller size plans, which is 1200 mm. My Walet is already equipped with FPV setup now, but still manual, no flight controller and GPS yet. In this episode I share with you only how to build this plane, not the FPV setup. I hope I can cover about it on other episode.

Read more

RC Airliner Boeing 737-300

E-mail Print

There are many request for me to build an RC airliner. I once build a small Boeing 737-800 in the past, the wingspan only 1400 mm/55 inch with pusher prop. But I haven't made the build video tutorial of it and the plans for you to build. So here it is Boeing 737-300 with 1800mm/71 inch wingspan. I will still use pusher prop, this time I will use twin pusher props. No EDF yet, because I haven't use EDFs before, so I will not make this huge model to learn using it. I will make F-35 after part 2 of this Boeing 737 to learn how to use EDF. If it succeed, I will make other EDF airliner in the future.

Read more

RC PT-17 Stearman Biplane

E-mail Print

This one is my most favorite RC plane  I've ever build. The first one was 7 years ago. I already build this 5 times and this is the last version, now complete with plans and build instructions. All wings and strut are all detachable, no need for glue to mount the wings and struts, just screws. I also made a papercraft / paper model figure for the 2 pilots that also shared on the link below along with the RC plans. This RC biplane is capable of STOL, Short Take Off and Landing. With big 80mm foam wheel, it can take off and land on most rough field on grass or dirt making it fun to watch it take off and landing seamlessly. I recommend you to build this RC plane, it's worth to try and very fun to fly it.

Read more

Bombardier CL-415 RC Plane Part 4

E-mail Print

Bombardier CL-415MP RC plane is finally finished, it's weight about 2200 grams or 4.8 pounds, but it can take off smoothly without using flaps. Also the landing can be done smoothly, with some adjustment. The front landing gear needs to be glued or bolt up to the fuselage. It's often came out of its slot and causing a bad landing. The aileron also needs bigger area to give sufficient control, I already revise the aileron size. The plane is a good flyer if you familiar with rudder control on turning. The hardest build on part 4 is building the wing tip floats, you need to watch the build video tutorial on youtube as well as build instructions with images in Paper Replika website. You can use differential thrust control or common control to fly the plane. The next build will be PT-17 Stearman.

 

Read more

Bombardier CL-415 RC Plane Part 3

E-mail Print

This episode is quite shorter than usual done, because it's coincide with family gathering on Christmas holiday this year. But I still try to update the build progress for this week. In this part 3, we will build the basic shape of the main wing, with 180 cm wingspan dan 22 cm chord. The main wing can be dismantled into 3 pieces for easier transport. The most outer wings that will host the ailerons and pontoon are detachable. The main wing also detachable from its fuselage as well.

 

Read more

Page 1 of 5

  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  3 
  •  4 
  •  5 
  •  Next 
  •  End 
  • »