You are here:: Home

ATR-72 600 RC Plane Part 1

E-mail Print

ATR-72 is twin turboprop engine made by France and Italy aircraft manufacture. Its main purpose is to be a commuter plane. In this episode I want to share with you on how to build nose section, landing gear and middle fuselage. It will be continued to other parts, maybe in 2-3 parts again. The wingspan in 1800 mm and for other specs you can look down on description below. The main material is 5-6 mm depron.

Specs :
1. Wingspan 180 cm / 70.9 inches
2. Flying weight : -
3. Wing loading : -
4. Wing cube loading : -
5. Wing Area 38.7 dm2 - 600 sq.in

Electronics
- 2X Turnigy 2826 1400kv motor
- 2X ESC 40A
- 2X Battery Lipo 3S 2200mah / Li-ion 3S 3300 mah
- 4 metal gear 9 gram servos
- 3 plastic gear 9 gram servos
- Propeller : 7x4x3

Materials :
1. 5mm Depron/ Polyfoam
2. 3mm Plywood
3. 0.3mm Mica Plastic
4. 2.5 mm + 3 mm wire / wheel spoke

BUILD INSTRUCTIONS :


Open the PDF file with Adobe Acrobat Reader (recommended software)
PDF security password : none

Download ATR-72 600 plans

Video Tutorial on Youtube