Home
F-15EX Eagle II RC Plane with Ducted Fan
- Details
- Written by: Julius Perdana
- Category: RC Foam Project
This is the first time I use twin EDF for fighter jet model. This F-15EX Eagle II RC model use twin 70mm EDF for the power plant.
I share all the plans and decal files on my website paper-replika.com, you can find the link to the build instructions page below. This model is simplified but still resemble the scale look of the F-15EX Eagle II on the top side, but the bottom side is very simple so the build process will not too hard. The model was build by my friend Roy with plans from me. The hardest part when building this model is on the nose section. The air intake comes in 2 different angles, so you may choose which one to make. Also the canopy has 2 version too, you can use segmented canopy or 2 piece of mica plastic molding.
Giant Cessna Citation CJ1 2200mm - 86" RC Model Plane
- Details
- Written by: Julius Perdana
- Category: RC Foam Project
Now I will build this giant Cessna Citation CJ1 RC plane. I will use 6mm foam board or Depron foam for the material and will test it with pusher prop configuration and also ducted fan (EDF) for more scale look, and also will try 3d printed retract landing gear for the first time.
Read more: Giant Cessna Citation CJ1 2200mm - 86" RC Model Plane
F-8 Crusader RC Jet with EDF and Pusher Prop
- Details
- Written by: Julius Perdana
- Category: RC Foam Project
In this video we're going to build from scratch and fly a legendary jet fighter, the F-8 Crusader I will also test it using pusher prop and EDF for the propulsion system
we'll see which one is better. I'll be relying on trusty 5mm Depron foam as the main material. Don't worry, I've prepared downloadable PDF plans on my website in both A4 and A0 sizes for your convenience. And the best part? This amazing F-8 Crusader will be brought to life by the talented Roy using my plans!
Tigermoth 1200mm Biplane RC Plane
- Details
- Written by: Julius Perdana
- Category: RC Foam Project
This time I'm back to basic by using all foam board material with some plywood parts. This De Havilland Tigermoth biplane RC plane is designed to have the same scale as PT-17 Stearman. While Stearman wingspan is 1300mm this Tigermoth wingspan is 1200mm. Smaller but still can do short take off. Using 3536 1200kv brushless motor, 40A Esc and 3S 2200mah can give this plane more than 5 minutes of flight time. The flying weight is about 1145 gram, with that made this model has 4 on wing cube loading and that's almost like a glider. Because it's the same scale as Stearman you can use Stearman's papermodel pilot figure.